Share < Back

5150022.1 Cargo Floor Slat connector strips 4 x M8 (190x25x15mm)

n1006856.pdf

Cargo Floor Slat connector strips 4 x M8 (190x25x15mm)

This very simple solution makes it possible to connect two or more Cargo Floor aluminum floor profiles to
each other to create one longer floor profile. This can be done with almost all variations of floor profile lengths

Floor repair savings
With a Cargo Floor moving floor the product is always unloaded (slides/flows) over the rear part of the trailer floor. It
will therefore be obvious that most of the wear of the floor profiles will take place there. At the front of the trailer floor
wear will be hardly visible. With this Cargo Floor connecting solution, the possibility now exists to only replace a part of
the floor (for example only the rear end). You will save on the costs because you don’t need a full-length floor and the
transportation cost will be less because you don’t need the full trailer space.

Advantages:

Cost saving
No welding required

Related Parts:

4008006

Cargo Floor Cargo Floor Plank / Slat Seal Per Metre
Cargo Floor Plank Seal - Per Metre. You will need 13.3 meters per plank with single seal. or 26.6meters per plank with double seal. £2.11

9111015

Cargo Floor Cargo Floor Slat connector Drilling Jig 2 x 4 holes
Cargo Floor Slat Connector Drilling Jig 2 x 4 Holes £158.53